Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22Q. What Thickness and Tolerances are VAC-SIL® Membranes made to? A. VAC-SIL® Membranes are manufactured in accordance with International tolerance standards and these are confirmed for the most popular thicknesses as follows:- VAC-SIL PRO® : 3mm (+/-0.3mm) & 4.5mm (+/-0.3mm) VAC-SIL LAMI-FLEX® : 3.8mm (+/-0.38mm) VAC-SIL® LAMIN8 : 3.8mm (+/-0.38mm) Q. What standard of packaging can you expect with VAC-SIL® Membranes? A. Membranes are rolled onto a cardboard tube interleaved with polythene, then packed inside a heavy duty cardboard tube, which is then packed inside polypropylene sacking. Q. What is the correct way to store stocks of VAC-SIL ® Membranes? A. After goods inward inspection of membranes upon receipt, we suggest you store inside the packaging. We then recommend you store in accordance with ISO2230, which generally suggests “storage temperature should be below 25° C and products should be stored away from direct sources of heat such as boilers, radiators and direct Sunlight.” If you need further help with this just ask – we are there to help. Q. How are the physical properties of VAC-SIL® Membranes measured? A. J-Flex use tangible world class rubber norms to measure the physical properties of VAC-SIL® Membranes. Typically ISO or ASTM specifications – see material data sheets. Q. Are the ingredients used in VAC-SIL® Membranes safe and fit for purpose? A. This is a very good question and we confirm that most of our recipe ingredients are of European origin. As such we have fully traceable Material Safety Data Sheets (M.S.D.S.) and these are available upon request. All of the raw material ingredients have been tested for compliance and guarantee that no banned substances are included in our finished product. January 2016